Advantage Pumping Solutions Blog & News

Harro Group Logo

Advantage Pumping Solutions Joins Harro Group

25th February 2020

We’re excited to advise you that from 1st April 2020 you’ll be seeing more of the Harro Group brand. We will continue to use the…

Pump Problems

Your pump problem FAQs answered

15th December 2017

Pump systems are durable when correctly installed and maintained. However, you may still experience problems, as any machinery with moving components and consistent usage is…

save energy with a pumping system

6 ways to save energy when you’re moving water with a pumping system

7th November 2017

Pump stations are required when water needs to be pumped from a low level up to a higher one to flow into a water system.…

Advantage Pump Systems

What makes Advantage your ideal pumping station supplier?

4th October 2017

Every project is different. One of the fundamental benefits of working with Advantage Pumping Solutions is that we recognise this fact and recommend the correct…

The environmental impact of flushing wipes

11th August 2017

Disposing of wipes down the toilet contributes to problems locally, nationally, and internationally. On a local level, blockages develop in the sewers which need to…

pump cavitation

Why should you worry about pump cavitation?

11th August 2017

Pump cavitation is a primary cause of pump failure on mobile equipment. If left untreated, cavitation can cause major issues within your pump as well…

Fatbergs: a by-product of flushing wipes

11th August 2017

‘Fatberg’. The word conjures up images of large blocks of fat, oil and grease, like the one found in Kingston in 2013 that weighed 15…

The problem with wipes: why you should never flush them

11th August 2017

Misinformation causes problems. In the sewerage industry, nowhere is this more evident than the misinformation swirling around about whether wipes of any variety are suitable…

sewerage system do's and don'ts

It’s our sewerage system: the dos and don’ts

24th February 2017

Sewerage systems shouldn’t be noticed. The ideal sewer running from any residential, commercial, or industrial site into the main system should take foul water and…

Why do mechanical seals fail and what can you do about it?

20th February 2017

Mechanical seal failure is one of most common reasons that a pump fails. These seals retain fluid within the pump utilising two flat surfaces, one…

Pump cavitation

5 ways to prevent pump cavitation

11th January 2017

Preventing pump cavitation is much simpler and more cost-effective than repairing and replacing your pump. There are steps you can take to ensure the life…

Pump control panel

We have moved!

9th September 2015

Harro Group have recently moved to a larger, more extensive premises giving the business access to greater resources. The new premises has over 5 times…